Hey guys,
Thanks for the great comments.

This is the first time I have mixed GI Joe parts with Star Wars, and it seemed to work out well.

For Stark I used a GI Joe Overkill head, and ROTS Agen Kolar body with the skirt cut down, and then a good painting.

For Hoilon I used a vintage Baroness head with the glasses whittled of with an x-acto knife, Opee w/Qui-gon legs, AOTC clone pilot arms, SAGA deluxe flipping Dooku pelvis, and SAGA Luminara Undulli torso and cut down cape. Followed by a good painting.

The special ops clone is a Bacara body, CLONE WARS blue ARC kama, clone commander head, and POTF2 at-st driver's rifle. The paint i mixed with cobalt blue and gray.

The Obi-Wan is made from the separation of the twins OB-1, arms and legs from a #6 quick draw clone, saga deluxe clone on speederbike helmet, and potf2 general Lando cape. No paint.

The ARC is made from a red clone commander body with most red paint removed, kama from same figure, viewfinder and pauldron from CLONE WAS blue ARC, head left over from my SA clone pilot custom, and two POTF2 Dengar pistols cut apart. and then a good painting.

Again I'm glad that you enjoyed these and will have some more up soon.
Thanks

Jon(vader419)

first trade with robb and it couldn't have been better.
definitely recommended
a+++++++++++

hey guys,
thanks for all of the great comments, they are much appreciated.

chewie- i like the name you came up with and will use it, thanks

darty ennis- all i did with the saber is glue on a green blade with a piece of a staple in between the hilt and blade for strength

commander cuda - i am actually in the process of painting the lower half of a bacta tank luke's legs in a maul tattoo pattern to go in another tank, and then i am building a diorama of palpy's personal vault.

again thanks for the comments and i'll be adding more shortly
 

aww, what the hell, here is one more.
it is a what if type deal
what if maul survived, and sidious kept him as sort of a failed attempt reminder


lmk what you think

thanks guys for the comments.
i wanted a clone that looked like he went to hell and back.

here is another
it is dooku in his earlier years.
i'm going to repaint him as i'm not happy with the way his uniform turned out

i don't post often,
but i really love your work owen and you too chewie.
how about some interlocking floor panels from places like
the death star
bespin
tattooine streets
falcon
endor
etc...

they could be 4"x4" and be a couple of mixed styles per setting
 
thoughts?

hey chewie,
that answers one of my questions, but the main problem is paint remaining tacky after a dull coat on the "rubber" parts such as the clone commander's holster skirt and agen kolars jedi robes.

although the painting of joints will definitely be easier now
thanks for the help chewie.