In regards to my above question I seem to recall iamsith doing some customs back in the day, I'm not sure if anyone has any knowledge on dismantling or breaking apart kubricks.
Yes, I did several customs back in the day. Most of the brick torsos are glued so you have to break them apart. I would remove the arms and go in with a razor blade along the side. Once the blade was in slightly I would start to rotate it until I could see the two pieces coming apart. Stick the blade in further and then give it a good turn and it should split in two. You may end up with a small hole where you first went in with the blade, but if you are adding robes or when you put the arms back on it shouldn't be too noticeable. You may also need to superglue the torso back together when you're done so that it stays together. Hope that helps.