151
Customs Community and Group Projects / Re: Official Custom Parts Needs List
« on: April 18, 2007, 05:35 PM »
delete
Bringing Balance to the Force
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
152
Feedback / Re: JACKOFTRADZE's feedback
« on: April 17, 2007, 05:39 PM »
Another great trade with JACKOFTRADZE. Again items receive in great condition from him. Very smooth deal. Don't think I could say anything more about this guy than I already have. Have and would trade with anytime. Thanks again JACKOFTRADZE.
roron corobb
roron corobb
153
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 16, 2007, 10:11 PM »
Sarge,
That statue rocks. That solid base looks too cool. I wonder what you have in store for the next up date.
roron corobb
That statue rocks. That solid base looks too cool. I wonder what you have in store for the next up date.
roron corobb
154
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 16, 2007, 08:59 PM »Thanks so much for the comments guys! I think better pics will illuminate the paintjob a little better. Brent, I think you're right about greeblies and I'll add a few more to it, thanks! By the way, it's no where near as large as it might look; definitely not a 2-story, and figures right next to it might look disproportionate
Edit: told you it was small!
Daigo-Bah,
Still looks cool. I would suggest making another door part maybe 2 parts (open like storm doors) and lay them flat in front of the door you have there, simulating an underground type dwelling or on part? Just an idea to fix the size problem.
Jesse,
I like the idea of graffitti, but the picture would be to low tech. If you could would up some holo type pictures that would be better.
roron corobb
155
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 15, 2007, 02:03 AM »I fit it over the original artwork, then reduced the opacity of the linework by half so the image showed through more.
Glassman,
Did you use the picture of Rieekan's Tactical Screen on Rebelscum? Or did you scan your the original Tactical Screen on a scanner? Also do you have a program for reduced the opacity of the screen's lines? Thanks for the walk through.
Roronn - I think I comments how much I like the Globe. However, if I didn't then here it is - I love it!
I'm nearly finished with 3 of the 6 buildings. I wish I would not have used the masking tape but I think they'll still be okay. I'm going to take some pictures of them outside in some natural light tomorrow.
Thanks Brent, and I was thinking of the same thing about the globe once it's complete with base. I think that copper paint look cool in natural light.
roron corobb
156
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 14, 2007, 12:38 PM »
Glassman,
Those are cool. Would also like to hear how you made them step by step. How many did you make? If you make any more I would suggest changing the lettering, but I really like them and will have to try this one myself down the road. They one with the side mount I think looks the best, as I thing the rail on the other takes away from the picture some.
roron corobb
Those are cool. Would also like to hear how you made them step by step. How many did you make? If you make any more I would suggest changing the lettering, but I really like them and will have to try this one myself down the road. They one with the side mount I think looks the best, as I thing the rail on the other takes away from the picture some.
roron corobb
157
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 14, 2007, 12:11 AM »Whoa, Roron that turned out GREAT!!!!
I really, really like that. If after the project is complete, and you don't want it back, I would love to add that to my collection... if we could work anything out please let me know. What a great addition this is man, the leg stilts are awesome, and the paint looks perfect just as it is.
Thank you for the compliments. Funny for you to ask that Chewie, as I was wondering the same thing as to how that was going to work sense Sarge and I both have work into this. I liked this idea so much I had to get a few more Complete Galaxies to try some of the other ideas I had on. Was able to get one of each so far. This project moved fast too, so I could always make you one if nothing comes from the UGP one. This one was a trail and error, so the next should be a breeze. Was even thinking about different emblems for bases and fountains. I would love to set one up on an axis and motorize it to spin, something like the World at Universal Studios. Maybe in my next venture on one.
roron corobb
158
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 13, 2007, 06:48 PM »
Okay, here it is complete and waiting for the base. I might have to add or change the legs some to mount on the base. I’m just not sure of the steps are going to be in the way or not. If they are I have one of two ways to fix it.
First I was thinking of adding a post straight up and down to the base where the legs would have mounted. Bringing up the height to clear the steps.
Or second I could notch the legs where they would hit the step as if the supports are going though the step.
Any ideas if I run into this problem or any other suggestions?
Here is a shot of the legs. I went with less supports that I wanted do to them not working out as well as I like, but it looks less jammed up which is a plus.
I went without weathering, because I like the effects of the paint. If I weathered it I don't know if they would have changed is the main reason, but a few others suggested it. Here is a picture showing some of the effects. It has multiple light sources with flash. The shadows that are created are cool looking and I think they give off their own weathering to some point.
Let me know what you think? Thanks
roron corobb
PS:
Chewie I think the tall one would be better for the same reason, the dominating presences.
Glassman, look forward to seeing what you have done.
First I was thinking of adding a post straight up and down to the base where the legs would have mounted. Bringing up the height to clear the steps.
Or second I could notch the legs where they would hit the step as if the supports are going though the step.
Any ideas if I run into this problem or any other suggestions?
Here is a shot of the legs. I went with less supports that I wanted do to them not working out as well as I like, but it looks less jammed up which is a plus.
I went without weathering, because I like the effects of the paint. If I weathered it I don't know if they would have changed is the main reason, but a few others suggested it. Here is a picture showing some of the effects. It has multiple light sources with flash. The shadows that are created are cool looking and I think they give off their own weathering to some point.
Let me know what you think? Thanks
roron corobb
PS:
Chewie I think the tall one would be better for the same reason, the dominating presences.
Glassman, look forward to seeing what you have done.
159
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 12, 2007, 10:09 AM »
Where was a gun rack with the Death Star accessory set too and if I'm not mistaken with the Imperial Force Multi-pack. I think this is the one Chewie is talking about? I have one of these from the accessory set that I can send. It is smaller than the other one, but would give you are range of weapons to sell. Let me know if you need it.
roron corobb
roron corobb
160
Feedback / Re: mister_palpatine's feedback
« on: April 11, 2007, 07:47 PM »
Another great trade with Greg. Trade with him back when he was known as mister_palpatine. Again item receive in great condition from him. Very smooth deal. Great guy to deal with and I would deal with him any time. Would also highly recommend him to anyone. Thanks again Greg.
roron corobb
roron corobb
161
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 10, 2007, 12:21 AM »I want to do one eventually, so I bought three PotC sets on clearance and stripped them down. As you can probably tell now, it's three wheels stacked together. The top is some plastic cap from the packaging to a cosmetic product my wife had. I saved a bunch of them because I thought they'd be useful (there's another on my building.) And the other bit is a wall adapter for an old phone.
Really glad you like the R5! I was afraid it might look too much like him. I have been wanting to find a use for that figure since we finally got a good version. I need to figure out how I'm going to paint it. Hopefully it'll minimize the likeness if I do it right.
Cool, I might have to see if I can find a few of those. Where did you find them? And what was the price?
Also I wouldn't worry about the R5, because even the white paint you have you don't see him that well. To us customizers we look at stuff that way
, so we notice it. That is all good though as we see the parts, but can also pull back and see the custom as a whole. Others normally only see the whole and sometimes see what was used.roron corobb
162
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 9, 2007, 09:14 PM »
That stuff is cool. Would love to know parts used on that power building. And the array is cool. Never would have thought to use POTF2 R5 like that.
I couldn't find that thing I was hoping to use for the trash can. I think my kids walked off with it.
roron corobb
I couldn't find that thing I was hoping to use for the trash can. I think my kids walked off with it.
roron corobb
163
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 9, 2007, 04:11 PM »
If anyone has a templet for a news paper, I can scale it and print them. I might have a trach can or something that can be used for one, but that is the problem I only have one. I'll see try and get a picture on it. Maybe someone can cast it, if liked.
roron corobb
roron corobb
164
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 8, 2007, 09:39 PM »
Thanks Fritz. I collect that stuff too. Not so much into the Modern, but am big on the WWII stuff. When it comes to 21st C stuff, I can almost pick it out right away.
Okay update
I still have much sanding and adding minor supports, but overall the globe is complete.
Need some suggestions on weathering. I was thinking of a green chalk sense of the copper, and the paint didn't weather like I would have hoped. I really like the hammered look, but would like to hear what others think. I don't really know if my weather skills are up to par, but I can alway try and if it isn't liked have someone else give it a try. Anyway, let me know what you guys thinK. Thanks
roron corobb
Okay update
I still have much sanding and adding minor supports, but overall the globe is complete.
Need some suggestions on weathering. I was thinking of a green chalk sense of the copper, and the paint didn't weather like I would have hoped. I really like the hammered look, but would like to hear what others think. I don't really know if my weather skills are up to par, but I can alway try and if it isn't liked have someone else give it a try. Anyway, let me know what you guys thinK. Thanks
roron corobb
165
Celebration IV - Ultimate Group Project / Re: The Ultimate Group Project - Diorama Construction/Design
« on: April 8, 2007, 08:41 PM »
Sarge,
Yes, you have a go for glue. I'm waiting on glue right now myself, so in a bit I should be able to post pictures and let you know what we have to work with on the fountain. Looks great.
Fritz,
That is awesome and what I thought of when I suggested mounting the dish. I like the M113 APC parts used. They really work on that building. The texture is even cool looking and looks perfect.
roron corobb
Yes, you have a go for glue. I'm waiting on glue right now myself, so in a bit I should be able to post pictures and let you know what we have to work with on the fountain. Looks great.
Fritz,
That is awesome and what I thought of when I suggested mounting the dish. I like the M113 APC parts used. They really work on that building. The texture is even cool looking and looks perfect.
roron corobb