I Posted This At another Site And Nobody Seemed To Care. So I Thought I Would post it Here Where People Are Open To Other People's Ideas Instead Of Trashing Them. Ok I'm Off My Soapbox Now.
I Have Been Reading In The Past Where People Were Looking For Saber Blades or They Were Painting Solid Tubes With Glass Paint. Anyway I Found These At A Hobby Store One Weekend When I Was Out Of Town And I Wanted To Share This Information With Everybody Here. I Personally Use These Rods To Make my Own Sabers and Repair Factory Made Sabers. The Only difference That I Know Of Is The Blue Replacement Rod And Green Rod Do Not Match Hasbro's. But I Don't Think That's a Bad Thing Because It Gives You Different Hues Of Blue And Green. They Also come In Red And Yellow. Included At The end Of This Is A Comparison Picture With A Hasbro Saber Next To The Replacement Rod Of The Same Color. On The Far Right Side Is The Yellow Rod And A Saber I Made From A Static Hilt With Yellow.
I Found These From Plastruct:
These Are 3/32(2.4mm) and are a Perfect Replacement for LightSaber Blades.
Part # FARY-3H Yellow
The Part # Listed Above Are For 10" Lengths (Packed 8 to The Bag) Plastruct Also Has Them In 20" Lengths. (Packed 4 to the Bag)Plastruct
Thanks For Reading,