Author Topic: ANOVOS Prop Replica Clothing, Armor, and Helmets  (Read 14259 times)

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
This is the way.


I have spoken.

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Anovos Kylo Ren Helmet
« Reply #1 on: November 4, 2015, 09:13 PM »
Up for pre-order now!

It's a bit pricey (seeing as I was able to get a stormtrooper set of armor for about $200 less), but from what I've seen so far, they're quality is top notch!
« Last Edit: November 9, 2015, 10:39 AM by Jeff »
This is the way.


I have spoken.

Offline Dave

  • Jedi Master
  • *
  • Posts: 6216
  • Never Trust a Big Butt and a Smile - BBD
    • View Profile
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #2 on: November 10, 2015, 10:35 AM »
I'd be interested in learning more about their pricing strategy.  It really kind of seems like its all over the board for Star Wars stuff.

I ordered the Stormtrooper kit for $350 (including helmet).
The Stormtrooper helmet by itself is $150.
The AT-AT driver helmet and Kylo Ren's helmet are nearly quadruple that at around $550.
Some really (seemingly) basic costumes like Imperial Officer and X-Wing pilot costumes (no helmet) are $1500.

I'd really love an X-Wing pilot costume, but can't even begin to pull the trigger at $1500 (and NO helmet?!?!) when I'm getting the full Stormtrooper kit for $350.  Its an orange jump suit with simple chest piece.  Am I'm missing something (other than greed)?

Its hard to believe its all because of volume, but who knows.

Anybody got any insight in to this?

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #3 on: November 10, 2015, 04:54 PM »
Hey Dave.  I ordered the Stormtrooper kit as well for $350 and the reason the price was so low on that at first was to not only generate buzz, but to generate cash in order to start the production.  They tiered the pricing of the kits (and full ensemble) and staged it up to $650 for the kit if you were to purchase today.  The vast number of kits that they were able to get pre-orders for allowed them to get some seriously high grade plastics, so these costumes should look fantastic!

I did a lot of research into Anovos before I purchased and a lot of their folks are from Sideshow and are members of the RPF, so they are really trying to put out high quality items.  There's a youtube video where they talk about having to go out and make the wool for the Imperial officer's uniforms and hats because the same material wasn't made anymore.  I would also recommend you check out the forums on FISD for more info on the Stormtrooper kit, they have a tread dedicated to it and the 501st are true experts on this.

Bottom line, I'm really excited to see these kits when they start shipping next month.
« Last Edit: November 10, 2015, 04:58 PM by Matt_Fury »
This is the way.


I have spoken.

Offline Dave

  • Jedi Master
  • *
  • Posts: 6216
  • Never Trust a Big Butt and a Smile - BBD
    • View Profile
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #4 on: November 10, 2015, 07:06 PM »
I'm super stoked for the Stormtrooper kit too.  I just hope I haven't gotten myself in over my head.  Check in next year when I'm wearing the helmet and some sweats because I threw in the towel on the kit building... :P

I'm not expecting the Stormtrooper armor to be made of the same materials that they used in the movies, but I am expecting it to look like the armor and have decent quality.

I guess I can sort of buy the fancy wool, but heck, that seems like a lot of money for a basic outfit.  Maybe I don't understand the target market for this stuff and people really want the exact wool used in the costumes. 

I'm still floored how an orange jumpsuit costs $1500.  Maybe they felt they had to reinvent the wheel on the material for this one too to be 100% prop accurate, but I would be 100% satisfied if they used a modern equivalent nylon/poly blend for 1/4 the price.  They priced me out / I'm not seeing the value in 100% movie accurate for that one at that price.  If they did the x-wing costume with helmet for $1000 I would consider it, but $1500 and no helmet seems outlandish to a non costumer like me.

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #5 on: November 10, 2015, 08:47 PM »
Link to the FISD forums.  There are a lot of good threads about building armor kits...it's going to prove to be a great resource as I've never done this before either!  It's also where I got a line on some boots.

Anovos Shadow Trooper build part 1

Part 2
This is the way.


I have spoken.

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #6 on: November 29, 2015, 12:07 AM »
The Stormtrooper kit is on sale through Cyber Monday...you can save $100.
This is the way.


I have spoken.

Offline Dave

  • Jedi Master
  • *
  • Posts: 6216
  • Never Trust a Big Butt and a Smile - BBD
    • View Profile
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #7 on: December 11, 2015, 12:49 PM »
Anybody check in to or buy a kit for a Stormtrooper blaster to go with their Anovos Stormtrooper armor kit?  I've checked out the 501st and other costuming web sites, but am struggling to find an option.  They're speaking in their costuming code and way beyond my simple knowledge of their craft.

Looks like there are some wood options, but I can't seem to find a place that has them in stock.

Anybody figure this out yet?

I can't be an unarmed Stormtrooper...

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #8 on: December 11, 2015, 02:55 PM »
Look around eBay if you want...just be patient and don't over pay.

A lot of people talk about purchasing a doopydoos kit...the full kit is about $90.
This is the way.


I have spoken.

Offline Dave

  • Jedi Master
  • *
  • Posts: 6216
  • Never Trust a Big Butt and a Smile - BBD
    • View Profile
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #9 on: December 11, 2015, 03:00 PM »
Look around eBay if you want...just be patient and don't over pay.

A lot of people talk about purchasing a doopydoos kit...the full kit is about $90.

Yeah, I looked around for that kit and couldn't seem to find a place that had them in stock.  Do you know if there is a place to buy these, or is eBay the place to get these kits as well?

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #10 on: December 11, 2015, 11:43 PM »
Check whitearmor.net.  That's the FISD forums and a great resource for TK Costuming.
This is the way.


I have spoken.

Offline Dave

  • Jedi Master
  • *
  • Posts: 6216
  • Never Trust a Big Butt and a Smile - BBD
    • View Profile
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #11 on: January 27, 2016, 09:59 AM »
Got my shipping notice for the kit for my Stormtrooper armor.  I really hope I haven't gotten in over my head on this one.

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #12 on: January 28, 2016, 01:43 AM »
Mine should be here tomorrow.  Did you check out the directions?

Also, go to whitearmor.net they have tons of how to's, what supplies you might need and build threads.
This is the way.


I have spoken.

Offline Dave

  • Jedi Master
  • *
  • Posts: 6216
  • Never Trust a Big Butt and a Smile - BBD
    • View Profile
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #13 on: January 28, 2016, 10:15 AM »
Mine should be here tomorrow.  Did you check out the directions?

Also, go to whitearmor.net they have tons of how to's, what supplies you might need and build threads.

Yeah, I looked at the directions.  I'm reasonably handy around the house, but have never done anything like this before and don't really have any experience working with plastic, unless its a drain pipe for my house. 

I get a little intimidated looking at all the stuff on whitearmor.net and all the 501st pages.  Some of those costume customizations are intense.   They need a "Stormtrooper costumes for dummies" thread.

I managed to order some white boots, but am still struggling trying to figure out where to get a kit for an E11 blaster.  I'm tempted just to buy a completed one online, but that feels like cheating.

Offline Matt_Fury

  • Jedi General
  • *
  • Posts: 9374
  • I aim to misbehave.
    • View Profile
    • Every Action Figure Parody has a beginning.
Re: ANOVOS Prop Replica Clothing, Armor, and Helmets
« Reply #14 on: January 28, 2016, 04:18 PM »
Try this as a guide in addition to the Anovos instructions.

I've never done anything like this either, but I'll just go slow and ask for help from some a friend that is in the 501st.  There's no deadline to get it done, so I might as well take my time.
This is the way.


I have spoken.