JediDefender.com Forums
Collecting => Customs => Customs Community and Group Projects => Topic started by: Fritzkrieg on February 26, 2006, 12:56 PM
-
Well,
I finally earned my Customizing Battle Scars. I was working on this Sweet Looking Imperail Pin-Up Girl and had to cut a piece of Plastc w/ my very dull Hobby Kinife, which I had planed on replacing Last night but I fogot the New Knife in my Cart >:( So I used my Dull one anyhow :-[ How do u get a dull knife to cut? Put all your muscle into it. at least that what I did :-[ So, I sliced right through the Pastic Piece, through the corner of my work table, Right through the Tip of my Lift Undex Finger, and across the crease of My pinky finger :'( I'd show you some pics but I think it's just too nast and might make someone sick. So, I'm out of the customizing Buisness for at least a week or so until my fingers heal.
-
Crap man... be careful! That sucks but I guess it could have been worse.... I've had a few cuts doing it, but nothing really bad in about 4 years or so... if the cuts aren't too wide, you could try putting superglue over the cuts, that's what I usually do. Maybe during this time you can work on your photonovel a bit?
:P
-
Same thing happened to me I was cutting plates of of a spare greivouse to go on my war droid and then all of a sudden.... I slice into my thumb, :-X nasty stuff I lost alot of blood that day.
-
:-X Jeez Fritz that sucks.
I was using an x-acto before and I used all my strength, it went through the clone and sliced my left thumb nail into 2 pieces.
-
:o
This whole thread is making me cringe.
I hope you get better soon, Fritz.
-
Yeah, get better.
But Chewie is right, try photonovels.
-
Fritz - Ouch! So far I've been mostly healthy from customizing injuries. However, every time I grab the dremel I think I'm about to loose my fingers.
Rest up those figures and get well soon.
-
It reminds me of the time when Owen was doing some cutting and ended up sitting in a pool of blood. Dude, be careful or you'll end up looking like some of your dead clones.
-
:o Oh man I'm sorry that happend to you man. :(
GUYS here is a little tip when using a Xacto blade to cut hard plastic. take a lighter and heat the blade for a few seconds then while the blade is hot, you can cut thru the hardest plastic like butter.
-
OW-CHI! Man that bites. I've had minor cuts, only about an 8th of an inch deep. Now my brother did something very similar to your incident. I cant rem if it was an exacto or a screw driver, but he did a slice from the tip of his thumb to about half way through his finger nail and flesh. That was totally nasty and bloody. Something like 3-4 stitches
CHEWIE: I've never heard of the crazy glue thing u mentioned. I dont think id have the courage to do that! :o
-
< Cliff Claven voice on>
Ya know, super glue is very simular to the glue doctors use to close up wonds. For smaller cuts they don't stitch them together anymore but instead krazy glue the skin back together.
< Cliff Claven voice off>
-
< Cliff Claven voice on>
Ya know, super glue is very simular to the glue doctors use to close up wonds. For smaller cuts they don't stitch them together anymore but instead krazy glue the skin back together.
< Cliff Claven voice off>
<Ace Ventura voice on>
Reaaaellyyy.
<Ace Ventura voice off>
;D
Seriously, didnt know that, thats sooooo; not cool. I guess it doesnt get infected from the glue, or Docs wouldnt use it, but still. that gives me an idea, I get these headaches; so if I glue my wife's mouth shut that should remedy them right?
:D ;D :P
-
< Moe Howard voice on>
Oh, wise guy huh? (http://www.clicksmilies.com/s0105/spezial/jasons_smilie/whip.gif)
<Moe Howard voice off>
-
As my dioramaing work often involves a table saw, I think of the guy I know that cut off his thumb and index finger everytime before I turn it on. It gives me pause. One mistake with a table saw it one too many.
-
< Moe Howard voice on>
Oh, wise guy huh? (http://www.clicksmilies.com/s0105/spezial/jasons_smilie/whip.gif)
<Moe Howard voice off>
<Lou Costello voice on>
I'm a baaad Boy
<Lou Costello voice off>
Your serve ;D
-
I don't think you use actual Krazy Glue... I think there's something like super glue that's made to medical use specifications.
I'd think the solvents in super glue would probably burn you up pretty good if you applied them to a cut and would leave a sick scar.
-
There's only one way to find out for sure though... :P
As my dioramaing work often involves a table saw, I think of the guy I know that cut off his thumb and index finger everytime before I turn it on. It gives me pause. One mistake with a table saw it one too many.
I had a similar experience as your friend with a band saw back in 7th grade. I went in early before school so I could work on my woods project, somehow I got distraced while making a cut and my hand slipped and went right into the blade. I've still got all my fingers luckily but that saw got me pretty good. For some reason it didn't hurt as much as I thought it would though.
-
be glad the floor didnt end up like this (scroll down mid-page 1...) chewie you hlding out over here and not at Scum?
http://threads.rebelscum.com/showflat.php?Cat=&Number=1716038&page=0&view=collapsed&sb=5&o=&fpart=1#1716038
-
Ha! The night before superbowl i almost sliced my finger tip off. I lost 2 pints of blood, 32 stitches, two days in the hospital, and $1500 of my dad's money. It still hasn't gotten better. I passed out to. I was splitting a torso w/ my x-acto knife. It's making me sick remembering. I sliced through all 7 layers and 3 veins. I almost died. I stoped customizing for a week and was grounded for 2 weeks.
-
Good Lord, I'm feeling sick reading that last post...
Yeah that Owen's cut was very bloody.
And I still post at Scum some, just mostly here lately.
:P
-
I stoped customizing for a week and was grounded for 2 weeks
Hold on, they grounded you for cutting your finger?
Kevin
-
wow..I'm glad I never get grounded or anythig when I cut myself...lord knows I do it ALOT...lol.