Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tykrazen

Pages: 1 2 3 4 5 [6] 7 8 9 10
76
Star Wars Action Figures / Re: tykrazen's customs
« on: April 10, 2006, 12:04 PM »
Wow -- it's been a while since I updated here...

Alot of new items... I'll post a few pics here and go check my gallery at theJawa.com for more pics...

First up is my Endor display...



This was built to display my Vintage Ewok village and the modern bunker.  The structure is made from foamcore.  I photoshopped the background images using some Redwood pics from the Diorama/ Background thread here at JediDefender.  The ground was made using painted foam sheets.  I built a foundation for the bunker which includes some grill work and access hatches.  The small plants are all model railroad scenic supplies.

The two Endor trees not part of the Vintage set were repainted.  Eventually I plan to add a bridge between them for the Luke/Leia revelation scene.

Next up is the Darth Vader Jedi Starfighter...



A basic repaint of the ROTS Anakin Starfighter.  I masked off the grey parts -- repainted the rest with Black spraypaint.  After that dried, I dripped silver paint and then wiped it towards the rear of the ship to create the fligh damage.

The final complete project is my Rebellion Era Cargo Shuttle.



This was a Playmates Star Trek Shuttlecraft that I gutted.  The cockpit is made from a Vintage GI JOE Vamp chasis and the added winds are from a vintage X-wing fighter.  (I'm still waiting on X-wing cannons for the wings).  A droid socket was cut into the top and built up using styrene scraps.

Finally, here's a few teaser shots of my next big project... A WIP Clone Command Center.  I'm using the top of a Vintage GI JOE Terrodrome as the centerpiece of the project...




If you want to see more WIP pics of this you can either wait until I get the page coded or you can visit my threads at thejawa or FFurg  :).



77
I know I'm a bit late to the party, but I wanted to post where I am at with this... before I show pics of the WIP I should give a little of the concept.  When  Chewie started showing images of Rykrof in the Rebellion, my brain assumed that he siwtched sides somewhere around Order 66.   And since he would be a marked man, Rykrof would need a foolproof disguise to evade the clone.  Inspired by Mad Martigan's disguise in willow, I present Rykrof: Clone Escape...





Basically I need to smooth the dremmel work on the chest and then repaint.  I debated about sahving him, but I think the beard makes it funny.

78
Customizing Tips and Tricks / Re: Casting of the Twins - wip
« on: March 2, 2006, 04:53 PM »
Quote from: Glassman6

[url=http://www.ironcowprod.com/forums/viewtopic.php?t=319
Have you checked this out yet?[/url]

Glassman,

I use the same materials you do, but I've always used a block mold for heads -- how are you getting the thin layer on your head molds?  Are you brushing it on?

79
Thanks for the compliments.  When I do finally get back to having free time again and can return to the site, I intend to post the plans and necessary image files for this display at theJawa for others to use.

As for Glassman's Roron I've already been talking with him :).  Pitty this is the first one he didn't create molds for his head sculpt.

As for the skipped characters, I think it was a risky line for Hasbro to create and given their desire to keep it a contained line, it's hard to find room to add those other figures.  Although I really wanted some battledroids.

80
It kind of reminds me of the shapeshifting Aliens in the 5th Element.

81
Customizing Tips and Tricks / Re: Dremel tools
« on: February 28, 2006, 10:17 AM »
The two bits I use the most often are a drill bit and an engraving bit for carving/ removing detail.  The engraving bits really allow you to do fine detail work without creating a hatchet job.  Definitely a good investment.

82
I actually get to particpate on a project with everyone here -- I've finished this in January, but my life has gotten so crazy, I never had a chance to post it, until now!  It's more of a display than a playset but I needed a single shelf design for my Clone Wars figures.  I had been trying to keep them all carded, but since Hasbro decided to include "new" sculpts in 3 packs, it ruined my display plans.






I wanted something that conveyed unique locations from the Clone Wars cartoon, but still created a unified look across the set.  This is one of my few projects using foamcore (I typically prefer wood) but given the printed images, it seemed like the best material.

83
Modern Classifieds / Re: Tykrazen Vintage and Modern for Sale
« on: January 20, 2006, 04:04 PM »
SAGA 03 13 Han Solo Hoth Rescue $5.00 <--- blue or brown? mosc? which card?
It's the first realease blue coat on the early 2003 starburst card

E1 Ki Adi Mundi .0100 $2.00 <-- purple saber?

?As far as I know there was only 1 version of this figure an it came with a purple lightsaber.  If you know there's another version, hollar back and I'll dig it out of storage.

Once you decide on these two pieces, PM me with a list of everything you want and we'll finalize the deal.

84
Modern Classifieds / Tykrazen Vintage and Modern for Sale
« on: January 18, 2006, 11:40 AM »
I'm thining my collection... here's a couple of items up for sale...

VINTAGE
Droids Side Gunner $35.00
Vehicle is Mint and in box.  Box has some mild to moderate wear...





BURGER KING TESB GLASSES
Lando Calrissian $5.00

BURGER KING ANH GLASSES
Luke Skywalker $5.00

TESB SIGMA CERAMIC MUG SET of 4 Loose $50 -- mine are loose, unused and no tags.


MODERN

VOTC
Darth Vader $13.00



CLONE WARS
Deluxe Destroyer Droid Launcher $5.00
Anakin Skywalker with Bonus Clone Value Pack $15.00
Yoda with Bonus Clone Value Pack $15.00

SAGA (02-04)
02 05 Kit Fisto $6.00
02 30 Darth Vader Bespin Duel $4.00 PENDING

03 13 Han Solo Hoth Rescue $5.00
03 31 Luke Skywalker Tatooine Encounter $8.00

Ultra Jabba the Hutt $10.00
Anakin Skywalker Force Flipping Deluxe $3.00 Heavy shelf-wear

POTJ
Masters of the Darkside MIP $30.00
Deluxe Darth Maul with Sith Attack Droid $10.00 PENDING
Darth Vader Dagobah Spirit MOC $6.00
                                                                       
E1
Ody Mandrell MOC $2.00
Darth Maul (Jedi Duel) .0001- Bent Card $2.00
Captain Panaka .0000 $5.00
Qui Gon Jinn (Jedi Master) -- Softgoods .0000 $8.00
Ki Adi Mundi .0100 $2.00

POTF2 Freeze Frames
C-3PO with Pull Apart Feature .00 $3.00
Lando Calrissian (General's Gear) .01 $3.00
(Slave) Leia as Jabba's Prisoner .02 $6.00
Princess Leia (New Likeness) $3.00

POTF2 Green Cards
Bossk .00 $3.00
Han in Carbonite .02 Bubble Crushed $2.00
Grand Moff Tarkin .01 $3.00 x2

POTF2 Red Cards
Ben (Obi-Wan Kenobi) .01 $3.00
Lando Calrissian .00 $2.00
Tusken Raider .00 (Bent Card) $2.00
Greedo .00 (Bent Card) $2.00
Momaw Nadon .00 (Bent Card) $2.00
Leia Organa .00 $4.00
Tie Pilot $3.00 PENDING

SOTE Boba Fett vs. IG-88 $7.50

POTF2 Electronic Power F/X Luke Skywalker $3.00

GALOOB ACTION FLEET DEATH STAR PLAYSET MIB -- Box was opened and set was used for display -- Box has moderate wear and crunched bubble.  Figures are loose, but the twist ties are still present to hold them.  $20.00



85
Paul,

What software are you using to capture the images?  I've been trying to get screen caps of various CW "sets" for use in the display I'm building and have had a really hard time at it.

86
Feedback / Re: Jeff's (pka Nataku) feedback
« on: October 4, 2005, 11:26 AM »
Had a great trade with Jeff for parts for my next project.  I would definitely trade again.

87
Adding to my wants list - I am looking for a ROTS Tarkin head -- a cast (even an imperfect one) is acceptable.

88
Yes, well I like them, so I posted them.

89
I really like these:
Custom Figure 501st Storm Troopers

Fixed the link for you as it was broken.  ;)

90
Customs Community and Group Projects / Re: Customs for disaster relief
« on: September 22, 2005, 01:40 PM »
I know what you mean. All I asked was for the thread to be pinned. It's not like I wanted to take over a section of his home page with a direct link to these auctions. Just a simple sticky.

All it means is that those of us who visit there should make sure this is always bumped to the top whenever it falls out of the first ten posts... a pain but what else can you do?

Pages: 1 2 3 4 5 [6] 7 8 9 10