JediDefender.com Forums
Collecting => Customs => Star Wars Action Figures => Topic started by: DmG on August 11, 2006, 02:16 AM
-
So I have a long way to go, undeneath is a real mess! :D But anyway, here is where I am so far, I figured I'd learn cutting and whatnot from a cheap vehicle so I picked the Lanard Corps Jet fighter, 5 bucks at Walmart with a figure!
(http://dmg.nhldepot.org/SW/images/wip/pilotshiptopview.jpg)
(http://dmg.nhldepot.org/SW/images/wip/pilotship1.jpg)
And here's the pilot.
(http://dmg.nhldepot.org/SW/images/wip/pilotfront.jpg)(http://dmg.nhldepot.org/SW/images/wip/pilotback.jpg)
-
It's interesting start so far DMG... I'm not familiar with the base but some random thoughts I'll throw out there...
The size of the ship is incredibly small while Star Wars sort of shows the ships (space anyway) to be of some bulk and size. Even a Snub Fighter like a TIE or Y-Wing is still a large and bulky ship when compared to a person... So that has me leaning, at first look, to your ship being a bit small... Speeder-ish in size more than a space-faring vessel if that makes sense.
Speeders in the film are clearly small, and that's maybe an advantage to them being used in combat.
Now, the next thing I'm noticing is a critique on the parts choices... Namely the two incredibly large cannons on the rear of the craft. The cannons are almost the length of the vehicle and given the overall lack of bulk to the craft, it starts to conflict sort of... When you look at the armament on a vehicle in Star Wars, usually a weapon has some bulk backing it up... For instance the cannons on the Snowspeeder have their bulk in the rear portion of the Speeder with bulky sections in the middle as well. The craft is small but there's a definite LOOK of where the "power" for those cannons comes from, if that makes sense... On your vehicle though, the cannons seem to just come out of the sides in the rear with nothing to substantiate the large guns being there... It doesn't look balanced then because of that.
In short I think I'd consider dropping the cannons first... They're just "too much" on such a small vehicle...
The overall shape is awesome though, very alien, and so is the bubble canopy... I dig that overall look. Some painting, some weathering/damage... It can make a really nice airspeeder, I just don't see it being a "combat" speeder or a space ship/fighter due to the small size.
If you've just GOTTA have guns on the vehicle, I'd go with a limited/small forward mounted cannon, perhaps just on the one side even... Something akin to the way the cannons are mounted on the twin-pod cloudcar. The guns are small and actually recessed into the curve of the forward hull on the speeder. They are a much more believable armament for a tiny craft like that.
Now, here's a thought too... And kind of ironic.
If you simply turned those guns AROUND, maybe made the portion where they connect to the vehicle a bit more "bulky" and solidly mounted to the hull (more like they're built into the body of the ship than sticking off the body), you'd have actually interesting looking engines that extend out past the back of the vehicle...
It's a little hard for me to put into words, but just looking at your first photo that seems like it would make the vehicle a bit longer, and look like it had a bit more of an engine to it too.
-
I like it. It certainly appears to be the same size as the EU air speeders that were released and the mini rigs of the true vintage line. So while some may say it is small for a star wars fighter, it fits in nicely with the overall
Color choice is excellent and goes with the star wars theme as well. Great design. I am not sure of its sturdiness for any type of play or movement but for display it looks very nice.
Best wishes and keep customizing!
-
I've used the Corps vehicles too as a basis for a custom. Here is an example of a star-fighter that I made:
(http://i7.photobucket.com/albums/y271/cerius31/Starfighter02.jpg)
(http://i7.photobucket.com/albums/y271/cerius31/Starfighter03.jpg)
They make very decent base models.
-
very nice!
Yeah I like working with the Coprs stuff, easy to work with. Im going to buy a few more of them to practice on, bought some cheap GI Joe vehicles on ebay too so some tanks and other craft will be coming soon!
-
I like it. It certainly appears to be the same size as the EU air speeders that were released and the mini rigs of the true vintage line. So while some may say it is small for a star wars fighter, it fits in nicely with the overall
The reasoning behind citing the size as an issue though isn't by drawing comparisons with it to the mini-rigs which are fanciful and more toy and less "realism" than say the A-Wing for instance...
The EU Airspeeder is just that though, an airspeeder, and has some pretty substantial bulk to its entire rear area with small cannons built into the body around the cockpit and being fed directly FROM the engines... So like the Snowspeeder (which itself SHOULD be small actually, the toy is just way oversized), the guns have a direct "soruce" for whatever fuels them... It's that kind of functional realism then that translated well from the films, giving the vehicle a look that's completely alien yet resonates that it LOOKS functional...
The other thing though that really differentiates the EU Airspeeder's guns/design from DMG's ship is the size of the cannons too then. The EU speeders are small and built into the body of the craft basically, while this vehicle's are bulky, large, and wholely separate of the ship's hull. I think that puts them just out of place on it and less streamlined to my eye... I think it's a great start with just a little work needed to take it to the next level.
-
Some more WIP, just need some paint and minor accessories, let me know what you like / dont like ...
(http://dmg.nhldepot.org/SW/images/wip/guard1.jpg)(http://dmg.nhldepot.org/SW/images/wip/guard2.jpg)
(http://dmg.nhldepot.org/SW/images/wip/clonecamo.jpg)(http://dmg.nhldepot.org/SW/images/wip/sithfront2.jpg)
(http://dmg.nhldepot.org/SW/images/wip/saesaetinn1.jpg)(http://dmg.nhldepot.org/SW/images/wip/saesaetinn2.jpg)
(http://dmg.nhldepot.org/SW/images/wip/jedirodian2.jpg)(http://dmg.nhldepot.org/SW/images/wip/jedirodian1.jpg)
(http://dmg.nhldepot.org/SW/images/wip/medicfront.jpg)
(http://dmg.nhldepot.org/SW/images/wip/medicback.jpg)
-
here's an update for these guys, painted mauls head, the rest will get paint tomorrow.
(http://dmg.nhldepot.org/SW/images/wip/3imperials.jpg)
-
I'm liking that AT-RT driver you're working on, very cool, can't wait to see paint. Is that clone on the far right based off the guys in the "force unleshed" trailer? Anyway, loking forward to more!
-
So here's the final product for my imperial guard / officer .. comments & critique please. B)
(http://dmg.nhldepot.org/SW/images/figures/empireofficer.jpg)
-
well after some insight over at the FF, I changed him up a bit ...
Outlander it is ... :D Jedi Hunter style, even has a light saber from a recent kill!
(http://dmg.nhldepot.org/SW/images/figures/outlandjedihunter.jpg)
-
Wow, that's some pretty cool stuff. I can't believe how unrecognizable the Maul head is. You did a very good job hiding that one!!
-
Heres the finished Clone Jedi Hunter ... just need clear coat tomorrow!
(http://dmg.nhldepot.org/SW/images/figures/clonejedihunter.jpg)
-
Great work! I love how that helmet turned out with the camo! I had made a bunch of casts of the origional vintage helmet and did not know how it would turn out mixed/matched with newer figure parts, but that right there proves it fits perfectly!
Great Stuff DmG!
More! Must see more!
-
Heres another WiP, I'm leaning towards light security of some kind, he'll be outfitted with some armour and weapons later.
(http://dmg.nhldepot.org/SW/images/wip/imperialsecurity.jpg)
-
small update, paint is done unless I decide to add some color to him, now its on to accessories! Got a 3rd on the go to ..
(http://dmg.nhldepot.org/SW/images/wip/imperialsecurity2.jpg)
-
Very impressive! And you make cloth look good, something that doesn't seem to happen often in the regular line.
-
A little more, Ill have more time on the weekend to work on some more stuff. But for now, A WiP Rodian Jedi, finished Ithorian Jedi, (just covered with clear coat), and a little comparison of the 3 Maul heads Ive done so far .. I think I may attempt some sculpey hair for one. B)
(http://dmg.nhldepot.org/SW/images/wip/jedirodianpainted.jpg)
(http://dmg.nhldepot.org/SW/images/figures/jediroroncorob.jpg)
(http://dmg.nhldepot.org/SW/images/wip/3maulheads.jpg)
-
Great update, you are really cranking these guys out. I love the way you did the legs on the Ithorian Jedi. They came out great. Did you have much problems getting them to attach correctly (and be even)? On the rodian, it looks like the parts came together pretty well. Do my eyes decieve me or did you make a "bent" saber handle for that one? Of the three WIPS at the bottom, the middle is my favorite. I love the side slung cloak. I think the one on the left needs some touch ups around the eyes. Try to put a very thin black line where the upper eyelid would be. I think it would help a lot.
-
So heres where I am now, I've added to it a bit, done some minor cockpit work. It's coming along though ... any thoughts?
(http://dmg.nhldepot.org/SW/images/wip/SHIP2.jpg)
(http://dmg.nhldepot.org/SW/images/wip/SHIP1.jpg)
(http://dmg.nhldepot.org/SW/images/wip/SHIP3.jpg)
(http://dmg.nhldepot.org/SW/images/wip/SHIP4.jpg)
(http://dmg.nhldepot.org/SW/images/wip/SHIP5.jpg)
-
Heres 3 WIP's, well the Twi'lek Sith Witch is done but the other 2 are still on the operating table.
The hair on the red head is from sulpey and Elizabeth Swan from the POTC line.
(http://dmg.nhldepot.org/SW/images/wip/sithwitchsithmara.jpg)
-
and a little more ...
Figs are just used to display the helmets.
(http://dmg.nhldepot.org/SW/images/wip/clonehelmetssculpey.jpg)
2 more fan fics ..
(http://dmg.nhldepot.org/SW/images/wip/cloneandpilot.jpg)
Vintage repaint ..
(http://dmg.nhldepot.org/SW/images/wip/bespinguards.jpg)
And finally a finished Rodian Jedi. Lots of WiP pics for this one, finally got around to painting it. I may still repaint the pants and boots, but for now he's on the finished side of the shelf!
(http://dmg.nhldepot.org/SW/images/figures/jedirodian.jpg)
-
WiP so far, needs to be painted again. Comments?
(http://dmg.nhldepot.org/SW/images/wip/jedidouku1.jpg)
(http://dmg.nhldepot.org/SW/images/wip/jedidouku2.jpg)
-
Asside from the wide leg stance giving illusion of being short looks good to me.
What figure did you take the lower torso from out of curiosity?
WiP so far, needs to be painted again
The boots definitely need a different color though. The current color looks like he is wearing rubber boots for wading though mud and sewers... (Well on some missions it would be appropriate I guess...)
-
Looks great, great idea. I have the same question as Straxus regarding the legs though.
-
Great job with the ships! Great designs and nice use of existing materials.
-
the legs Im not 100% sure, but the waist is from a Hammerhead.
-
I like it until the legs, can you say POTF 2ish? ;)
-
survey says .... time for new legs! ;D Update coming somtime soon.
-
Finally got my dig cams batteries charged up, just finished this one off. Comments/critique always welcome! ;D
(http://dmg.nhldepot.org/SW/images/figures/clonecommanderredblack.jpg)
-
Nice, the ScubARC Trooper. Good job!
-
awsome looking!
-
Can't really critique creative vision. It's well painted and well put togeather. Great job!
-
I can't really critique the clone himself other than that he looks cool, but I absolutely love the holster and it's associated weapon. Great work!
-
NICE!!! I love the black and red color scheme, its one of my faves.
The cloth Kama is a nice touch. I love the helmet, How exactly is that put together?
The parts choices are a nice blend, I like that, The armor and belt pouches look excellent.
Not a bad job I have to say. I look forward to seeing more of your work.
-
Nice looking clone. My favorite part is the working holster. I like the way these are put together. The paint scheme looks nice but the flash photography wipes out some of the detailing I'm afraid.
-
yeah .. i cant seem to get nice clear pics ... damn lighting. ;D
-
and another WiP ..
(http://dmg.nhldepot.org/SW/images/wip/clonegeneral.jpg)
-
Very cool. The only thing that I might want to change is the backpack seemed to sit low on the back. Keep up the great work!
-
Pretty much finished now ...
(http://dmg.nhldepot.org/SW/images/figures/clonegeneral.jpg)
-
Here they be ..
(http://dmg.nhldepot.org/SW/images/wip/3figs.jpg)
-
I like them, its a nice use of parts. Did you use gi-joe arms on the clone?
-
Yeah the top part are GI Joe arms ... ill have a paulderon over the rounded shoulders so it looks a little more like SW. :)
-
finished the paint on the left. The right is another Clone WiP, Commando style. :ph34r:
(http://dmg.nhldepot.org/SW/images/wip/lastwip.jpg)
-
just have to put the last piece on his left arm (unpainted part) and a clear coat. Comments?
(http://dmg.nhldepot.org/SW/images/figures/greycommando.jpg)
-
Cool updates! The commandos were awesome!
-
2 more fan fics basically done. I may add to the Kel Dor Sith (like painting his head). The Clone is a Cody with a Barca kama with holsters added, a custom rifle and Pilot Helmet. The Jet pack is a POTF Boba cut a bit to fit Codys inside. Comments?
(http://dmg.nhldepot.org/SW/images/figures/clonejetpackgrey.jpg)
-
3 more WiP's ...
Rodian Padawan, Sith Alien and a Fire Speeder Commander. B)
(http://dmg.nhldepot.org/SW/images/wip/rodianpadawan.gif)
(http://dmg.nhldepot.org/SW/images/wip/sithalien.jpg)
(http://dmg.nhldepot.org/SW/images/wip/firespeedercustom.jpg)
-
a few more ...
(http://dmg.nhldepot.org/SW/images/wip/MundiSith.gif)
(http://dmg.nhldepot.org/SW/images/wip/sorabulgsmuggler.gif)
-
heres a few more Ive been working on, first is an Anikan I found on ebay looked similar and sparked the idea,
"what if Anikan had beat Obi-Wan in the end of EIII ...
(http://dmg.nhldepot.org/SW/images/figures/vaderkilledobiwan.gif)
Next is 3 clones to look some what like shock troopers for my son.
(http://dmg.nhldepot.org/SW/images/figures/cloneshocktroop.jpg)
Then 2 wip's ..
(http://dmg.nhldepot.org/SW/images/wip/sithbig.jpg) (http://dmg.nhldepot.org/SW/images/wip/jedimaul.jpg)
more to come!!
-
;DN-I-C-E!!! I like them
-
My son asked me to paint his clones , he has a mix of Blue, red, a few scorches, and some Saga and POTF Stormies. Then he has Cody and a 6 man unit of Utapau Clones, so now he wants them all in groups. :)
So far Ive done 2,
(http://dmg.nhldepot.org/SW/images/figures/cloneutapscorchshadow.jpg)
-
Heres a 5 man unit in Red.
[image]http://dmg.nhldepot.org/SW/images/figures/cloneRED5.jpg[/image]
-
Heres the final product .. he also wanted an old Captain America re-painted so I threw that in for fun. :D
(http://dmg.nhldepot.org/SW/images/figures/capamerica.jpg)
(http://dmg.nhldepot.org/SW/images/figures/clonebluesquad.jpg)
(http://dmg.nhldepot.org/SW/images/figures/cloneredsquad.jpg)
(http://dmg.nhldepot.org/SW/images/figures/cloneutapausquad.jpg)
(http://dmg.nhldepot.org/SW/images/figures/cloneshadow.jpg)
-
heres an un-named Bounty Hunter. I really like how this turned out.
(http://dmg.nhldepot.org/SW/images/figures/bountyhuntergrey.jpg)
-
I'd love to see a group shot, just to get a sence of scale of the amount of work you've done.
-
and here is your group shot so far.
(http://dmg.nhldepot.org/SW/images/figures/allcustoms.jpg)
and heres a new clone, loosely based off of Commander Gree
(http://dmg.nhldepot.org/SW/images/figures/clonecamocmdgree.jpg)
-
Been working on a few things, again for my son Connor who at 4 can name most if not all the main characters from all 6 movies. :lol:
These are all WiP so any comments/suggestions are welcome!
First is the ATAT I bought him, a while back I was looking for chin and side guns ... after seeing the prices on ebay, I had to do something. I think once its painted it should look ok, he's excited.
(http://dmg.nhldepot.org/SW/images/wip/ATAT.jpg)
Next is an Imperial Base for him to play with. I bought a GI Joe base to customize with sheet styrene but as a practice run I made this out of card board and am in the process of painting it.
(http://dmg.nhldepot.org/SW/images/wip/imperialbase.jpg)
And finally a figure. A Clone recon/sniper.
(http://dmg.nhldepot.org/SW/images/wip/clonesniper.jpg)
-
heres a few more ...
weapons
(http://dmg.nhldepot.org/SW/images/figures/weapons.jpg)
my Master Syfodias concept
(http://dmg.nhldepot.org/SW/images/figures/syfodiascustom.jpg)
not sure what to call him ... still wip.
(http://dmg.nhldepot.org/SW/images/wip/smugglerwookietype.jpg)
-
Newer stuff now, these 2 are going to ebay to support the hobby. [;)]
(http://dmg.nhldepot.org/images/ebay/jedihunter.jpg)
(http://dmg.nhldepot.org/images/ebay/shadowmarine.jpg)