JediDefender.com Forums
Collecting => Customs => Customizing Tips and Tricks => Topic started by: Ook on October 28, 2006, 01:27 AM
-
Anyone ever drill acrylic? It seems like a brittle plastic. I'm wondering if I can drill peg holes for Ultarama pegs in these shelves (http://www.potomacdisplay.com/pd_catalog.cgi?dct=on&tt=808) without destroying them?
-
Hm, never had the pleasure of owning acrylic displays, let alone drilling holes in 'em. But if you think it's not the sturdiest material around, I'd use a very small drill at first (the kind you use for drilling in metal) and drill at a high speed.
Perhaps you could also ask Potomac if it's safe to drill these displays?
-
Don't Use High Speed It Will Melt The Acrylic, I've Always Drilled Holes By Hand But If You Use a Drill Use The Lowest Speed You Have. or Use A Dremel on Low. I Also Use A Bradpoint Or Diamond Coated Bit Too. You Can Drill It. I've Drilled Acrylic Rods I Use For Lightsabers. If You Any Help PM Me and I'll Try to Help You Out.
Allen
-
Thanks, guys. That's very helpful.