JediDefender.com Forums

Collecting => Hey Hasbro! => Topic started by: Jeff on May 5, 2005, 12:24 PM

Title: Please Give Us An AT-TE
Post by: Jeff on May 5, 2005, 12:24 PM
Dear Hasbro,

Please make us a 3.75" action figure scale AT-TE.

We are in desperate need of one so that our Republic Forces have a wicked vehicle to blast away at the Separatists. With it, we could recreate the awesome battles of Revenge of the Sith.

Go ahead and pack it full of cool play features if you must (for the kids), but really do it up right.  Thank you.

Your Pal,
Jeff
Title: Re: Please Give Us An AT-TE
Post by: Jesse James on May 5, 2005, 03:02 PM
I have some good pictures of the one from the Lucasfilm archives at C3.

You do it up like that and I'll bring flowers to every cubicle at your offices.
Title: Re: Please Give Us An AT-TE
Post by: ruiner on May 10, 2005, 05:57 PM
I'm just stopped by to say that I'd buy one.

No flowers, just cold hard cash.

Title: Re: Please Give Us An AT-TE
Post by: JesseVader08 on May 12, 2005, 05:01 AM
Yeah, this is one of those ships that every adult kid has to have! 
Title: Re: Please Give Us An AT-TE
Post by: Mister Skeezler on May 12, 2005, 05:02 PM
Put me down for one or two of these!!!  ;D
Title: Re: Please Give Us An AT-TE
Post by: Darth_Anton on May 18, 2005, 11:30 AM
An AT-TE would be too big and expensive for me to own. Yet, I'd still buy one, so please make one!
Title: Re: Please Give Us An AT-TE
Post by: TT8L on June 3, 2005, 03:02 AM
I couldn't ever afford or justify the purchase of one but I'd be happy just to be jealous of someone elses...
Title: Re: Please Give Us An AT-TE
Post by: bobafett1121 on June 28, 2005, 12:45 PM
I would really like a AT-TE. and if i can afford to have two AT-AT's then I can afford to have at least two AT-TE's. so please hasbro make them.
Title: Re: Please Give Us An AT-TE
Post by: Joe on November 4, 2005, 07:37 PM
o.k. its official we're not getting what we want.I m going to make my own. 8)
well not to find alot of foamcore.
Title: Re: Please Give Us An AT-TE
Post by: sith lord on December 10, 2005, 09:12 PM
hey hasbro now that you made an at-te gunner he needs his at-te
Title: Re: Please Give Us An AT-TE
Post by: Joe on December 12, 2005, 03:00 PM
good point you're right......NOW GET BUSY hasbro!
Title: Re: Please Give Us An AT-TE
Post by: Smartypants1635 on January 16, 2006, 10:40 PM
i was sent some cut sheets for it if anyof you are interested ill forward the e-mail
Title: Re: Please Give Us An AT-TE
Post by: Clone Commander on January 17, 2006, 05:28 PM
An AT-TE would be best!
But what about the Clone Turbo Tank(Lego's title.)?
Title: Re: Please Give Us An AT-TE
Post by: Stiller on April 26, 2006, 12:16 PM
Another long everdue vehicle. Hasbro said that should the vehicle have a role in ROTS that they would consider it.

How much bigger of a role that the vehicle that was ordered to kill Obi-wan Kenobi need to be?

It played nearly as big a role as the AT-AT did in ESB.

Plus it's just a cool freakin' vehicle to look at, let alone play with.

How they could make a gunner and not the vehicle is beyond me. G.I.Joe gets royal treatment in comparison, if you ask me. And the new guy in charge of teh SW license is the old G.I.Joe guy.  So what's the deal then??

Shelf space? Well, quit making those ridiculous other lines (Jedi Force, Force Battlers, Choppers, Transformers, and to a lesser extent for me, Unleashed battle packs). Then the stores will have plenty of room for larger vehicles.

Still not biting, then make it an internet exclusive.

heck if Code 3 can make die-cast vehicles and sell through them for a couple hundred a pop, then you can make a cool AT-TE for $100.

I'd like to see it have room for two pilots in the cockpit, 4 gunners (1 at each station) and room for more clones in the main compartments of the vehicles front and rear. Even if no room for those extra clones it would still be cool. Plus don't forget the canon on top and the attached seat for yet another gunner to fit into it.

Don't add electronics, that's fine. That will keep cost down. Just make the legs articulated, swivel canon on top, ball joint guns at the gunner stations and an opening cockpit and most of us would be QUITE pleased.

Think about the cost too, 4 legs are the same mold (fore and aft sets) while the middle 2 are the same. So there's major reuse of molds. So it just leaves the body to get the attention to detail that would be required.
Title: Re: Please Give Us An AT-TE
Post by: Darth Slothus on August 9, 2006, 09:16 PM
P  L  E  A  S  E !  !  !  !  ! ;D
Title: Re: Please Give Us An AT-TE
Post by: ATL on August 14, 2006, 03:23 PM
HERE,HERE!!
Title: Re: Please Give Us An AT-TE
Post by: JDH1173 on August 23, 2006, 09:29 PM
Pretty please! :'(
Title: Re: Please Give Us An AT-TE
Post by: Darth Broem on August 26, 2006, 03:20 PM
Yes, this would be most welcome.
Title: Re: Please Give Us An AT-TE
Post by: Artoo on August 26, 2006, 05:12 PM
If you do make an AT-TE, pack in the gunner again as well!
Title: Re: Please Give Us An AT-TE
Post by: Reid on August 26, 2006, 05:42 PM
Bah, I could care less about those newfangled AT-TE. Give me an OT-style Imperial Juggernaut instead!
Title: Re: Please Give Us An AT-TE
Post by: JDH1173 on August 26, 2006, 07:53 PM
Hunter, are you talking about the "Rolling Slab" Turbo tank or the old school ITT?  The turbo tank would be the size of a coffee table!
Title: Re: Please Give Us An AT-TE
Post by: JangoTat on September 4, 2006, 08:32 PM
oh an At- Te would be amazing@!!!and yes pack in a gunner..or two :)
Title: Re: Please Give Us An AT-TE
Post by: ATL on September 23, 2006, 06:35 PM
Hunter, are you talking about the "Rolling Slab" Turbo tank or the old school ITT?  The turbo tank would be the size of a coffee table!
Larger than a car if exactly scaled. ;D
Title: Re: Please Give Us An AT-TE
Post by: Artoo on September 26, 2006, 07:17 PM
Well, the AT-TE would be too. ;)
Title: Re: Please Give Us An AT-TE
Post by: ATL on September 26, 2006, 08:25 PM
No I calculate almost 3 ft. long
Although maybe if you drive a clown car ;D
Title: Re: Please Give Us An AT-TE
Post by: Jeff on March 12, 2008, 01:32 PM
Dear Hasbro,

Please make us a 3.75" action figure scale AT-TE.

We are in desperate need of one so that our Republic Forces have a wicked vehicle to blast away at the Separatists. With it, we could recreate the awesome battles of Revenge of the Sith.

Go ahead and pack it full of cool play features if you must (for the kids), but really do it up right.  Thank you.

Your Pal,
Jeff

Dear Hasbro,

Thank You.

Your Pal,
Jeff
Title: Re: Please Give Us An AT-TE
Post by: jedi_master_sal on March 12, 2008, 02:16 PM
I'll second what Jeff said.

A MOST gracious thank you. This toy is the toy of dreams. I can't wait to get my grubby mitts on one and actually PLAY with it!

I've campaigned for nearly 6 years  for this to be made as a toy, since seeing it in AOTC. I'm extremely glad that it's finally being made.

Thank you again!
-Sal
Title: Re: Please Give Us An AT-TE
Post by: Darth_Anton on March 15, 2008, 10:13 AM
Gotta give thanks as well. The thing looks amazing and I can't wait to get my hands on one to play with it.
Title: Re: Please Give Us An AT-TE
Post by: David on March 15, 2008, 11:03 AM
Yes, it's truly a thing of beauty. :)

(http://www.sirstevesguide.com/plugins/p17_image_gallery/images/1510.jpg)