I'm really only looking for US version only to complete this set. If it were a loose collection then that would be a different story. Thanks for the offer Matt.
I figured that was the case Chris, but just thought I'd double check just in case...
I've heard a million different ways in trying to take those price tags off of figures, but what really is THE best way to remove it without damaging the card or bubble (bubble in this particular case)
Well, I've never had to use any of those strange liquids or solutions, hairdryers, etc, etc. What I do, is just take the sticker off the old fashioned way - by hand, and VERY slowly. Most of the sticker removing stratagies are more suited to the vintage arena, where a sticker has been attached to something for many, many years.
Chris, I'm sure your stickers there should peel right off probably, as I'm sure they're fairly new. It's even better that they're on the bubble, since you can't really damage a bubble, like you can a card (unless you smash it). Any residue that's left after pulling the sticker off can usually be taken off just by firmly pressing/dabbing the same sticker you just removed against the residue several times. That's what I always do. Just dab the removed sticker against it's residue however many times it takes to remove the rest of the sticky stuff from the card or bubble. Sometimes, if simple dabbing doesn't work, I'll "roll" the removed sticker over the remaining residue a few times. This works just fine for almost anything that has any type of sticker/tag attached to it - not just SW figures.
Either way, you should be fine. And since it's on a plastic bubble, whatever happens, you can get the residue off eventually, and you'll never even notice. Just make sure not to crush the bubble in the "dabbing" process, if that's even necessary at all... Good luck Chris, and again - great score!