451
Star Wars Action Figures / Re: 12" Jedi Master KI-ADI-MUNDI
« on: May 12, 2005, 02:20 AM »
Thanks guys doing a few new projects so once there done I'll post em and thanks
Ron
Ron
Bringing Balance to the Force
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
452
Customizing Tips and Tricks / PAINTING TUTORIAL DONE EASY
« on: May 11, 2005, 07:32 AM »
Hi All
here is Ki-Adi-Mundi paint tutorial sorry for the big pics as I wanted to show the detail that goes into it, also this technic can be done for any 12" head. Oh sorry about the spelling mistakes on the tutorial.
Ron
here is Ki-Adi-Mundi paint tutorial sorry for the big pics as I wanted to show the detail that goes into it, also this technic can be done for any 12" head. Oh sorry about the spelling mistakes on the tutorial.
Ron
453
Star Wars Action Figures / Re: 12" Jedi Master KI-ADI-MUNDI
« on: May 11, 2005, 07:22 AM »
Hi DD
Tutorial coming over asap I would'nt mind doing a regular thread but 80% of my customs are not Star Wars so I really don't know if the members would like to see WWII military or alot of other scifi figures?
Ron
Tutorial coming over asap I would'nt mind doing a regular thread but 80% of my customs are not Star Wars so I really don't know if the members would like to see WWII military or alot of other scifi figures?
Ron
454
Star Wars Action Figures / Re: 12" Jedi Master KI-ADI-MUNDI
« on: May 11, 2005, 02:06 AM »
Hi jadesfire
it is easy to pop the head from a hasbro body to a dragon body just put the had under boilong water and let it soften and just pull it.
Ron
it is easy to pop the head from a hasbro body to a dragon body just put the had under boilong water and let it soften and just pull it.
Ron
455
Star Wars Action Figures / Re: 12" Jedi Master KI-ADI-MUNDI
« on: May 9, 2005, 02:03 AM »
Thanks for the comments guys really appreciate them, going to try and get the ultimate villian Anikin / Vader and Sidious and try my hand at doing them.
Ron
Ron
456
Star Wars Action Figures / 12" Jedi Master KI-ADI-MUNDI
« on: May 8, 2005, 06:53 AM »
Hi All
Completed yet another Starwars figure and as with dooku he was pretty easy custom.
the whole figure is from Hasbro I swapped everything over to a DML body and repainted the head and hands with acrylics.
The boots, belt and saber have also been repainted the saber has been shortened by cutting a few milimetres from the middle and then both ends re-glued back together.
Ron
Completed yet another Starwars figure and as with dooku he was pretty easy custom.
the whole figure is from Hasbro I swapped everything over to a DML body and repainted the head and hands with acrylics.
The boots, belt and saber have also been repainted the saber has been shortened by cutting a few milimetres from the middle and then both ends re-glued back together.
Ron
457
Star Wars Action Figures / Re: Stargate Col Jack O'Neill SG-1 (lots of pics)
« on: May 7, 2005, 07:33 AM »
Hi Guys
Sith - I know what you mean between my 12" figures and my military models my wallet always seems to be empty but hay I would'nt have it any other way.
CorranHorn - I've already done a fan fiction Jaffa First Prime I'm in the process of doing Carter and Tealc in 12" scale and also a 12"Goa'uld in snake head armour.
Ron
Sith - I know what you mean between my 12" figures and my military models my wallet always seems to be empty but hay I would'nt have it any other way.
CorranHorn - I've already done a fan fiction Jaffa First Prime I'm in the process of doing Carter and Tealc in 12" scale and also a 12"Goa'uld in snake head armour.
Ron
458
Star Wars Action Figures / Re: Stargate Col Jack O'Neill SG-1 (lots of pics)
« on: May 7, 2005, 12:39 AM »
Thanks for the comments guys
Sith Lord Chaos - hi mate I have'nt been able to find a vest that even comes close to the one SG1 wears I have been told you can make one but you have to buy 2 vests to make 1 accurate one and I just can't afford it.
So the next best thining is the webbed version vest.
Ron
Sith Lord Chaos - hi mate I have'nt been able to find a vest that even comes close to the one SG1 wears I have been told you can make one but you have to buy 2 vests to make 1 accurate one and I just can't afford it.
So the next best thining is the webbed version vest.
Ron
459
Star Wars Action Figures / Re: OT Stargate SG-1 Custom Cards - Update 5/06
« on: May 7, 2005, 12:31 AM »
Totally awesome cardback Sith can't wait to see the figures that your doing.
Ron
Ron
460
Star Wars Action Figures / Stargate Col Jack O'Neill SG-1 (lots of pics)
« on: May 5, 2005, 03:55 AM »
Hi All
finished O'Neill off in the wee hours of the morning I do apologize if it's not suppose to be here but I know a few of you are Stargate fans.
the head is from a memeber over on OSW as are the tranfers it was painted acrylics all the gear is from Dragon except the jacket which is from elite force(BBI) which have been weathered and slightly sanded.
I decided to give him a kevlar helmet instead of his well known baseball cap as I could'nt find one anywhere.
The boots have been redone using small eyelets and string a big thanks to scanmandan for sending me the eyelets and string.
the P90 sling is made from some old strips of material edging and also some modern day clips I had in the bits box.
Ron
finished O'Neill off in the wee hours of the morning I do apologize if it's not suppose to be here but I know a few of you are Stargate fans.
the head is from a memeber over on OSW as are the tranfers it was painted acrylics all the gear is from Dragon except the jacket which is from elite force(BBI) which have been weathered and slightly sanded.
I decided to give him a kevlar helmet instead of his well known baseball cap as I could'nt find one anywhere.
The boots have been redone using small eyelets and string a big thanks to scanmandan for sending me the eyelets and string.
the P90 sling is made from some old strips of material edging and also some modern day clips I had in the bits box.
Ron
461
Star Wars Action Figures / Re: OT Stargate SG-1 Custom Cards
« on: April 19, 2005, 05:31 AM »
Fantastic looking insert can't wait to see how all the packaging turns out especially with the figures.
Ron
Ron
462
Star Wars Action Figures / Re: Clone Special Ops.
« on: April 19, 2005, 05:28 AM »
Awesome figure DD especially like the Shock Troopers top notch stuff mate
Ron
Ron
463
Star Wars Action Figures / Re: AOTC SA Clone Pilot
« on: April 19, 2005, 05:25 AM »
THEY LOOK REALLY GREAT WELL DONE
Ron
Ron
464
Star Wars Action Figures / Re: My Customs are up now... Finally
« on: April 19, 2005, 05:23 AM »
Damn thats alot of customs and very well done indeed keep up the great work
Ron
Ron
465
Customs Community and Group Projects / Re: What new Customs Projects are you planning?
« on: April 15, 2005, 07:26 AM »
Damn where do I start
12" figures
Luke in Jedi attire ROTJ
ARC Trooper EP3
Shock Trooper EP3
Obi Wan in clone trooper armour
Obi Wan EP2
Han Solo ANH (2nd figure)
Indiana Jones ROTLA (2nd figure)
Col Jack O'neill Stargate SG1
Ron
12" figures
Luke in Jedi attire ROTJ
ARC Trooper EP3
Shock Trooper EP3
Obi Wan in clone trooper armour
Obi Wan EP2
Han Solo ANH (2nd figure)
Indiana Jones ROTLA (2nd figure)
Col Jack O'neill Stargate SG1
Ron