JediDefender.com Forums
Collecting => Customs => Customizing Tips and Tricks => Topic started by: Desfiy on November 10, 2006, 11:04 AM
-
Can anyone tell me how to tighten up loose limbs on my figures, an easy method which still gives them some articualtion but doesnt have them hanging loose, I have a few vintage figures which have become loose.
-
Quite easy, but stay sharp: apply a drop of superglue in the joint and slowly rotate the limb. Or, if it's a leg that won't go round 100%, just move it back and forth slowly. This will cause the glue to be smeared throughout the joint. Just don't stop too soon, or the limb will be glued shut. You'll know when you're almost done, if the glue starts to settle and dry out. Just keep moving it a bit more, just to be sure. And test it first.... on cpt. Solo. Just kidding, just use a leftover fig, if you have any.
-
Thanks incom15, I will give it a try, I have two cloud car pilots.
-
Good luck, then, and remember to keep rotating those limbs :)